EPT Tire Crusher EPT Tire Crusher Gear Rubber PowEPTLine
The EPT tire recycling EPT will be managed by the PLC, all the supplies will be process within of EPTs, there is Actual ZERO Pollution. 1 labor, 1 engineer can run all the EPTs, no need to work the EPTs, just management the PLC. the EPTs can safeguard the EPTs, operate the EPTs and hold the EPTs work easily.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automatic manage technique, with automatic reversal management system in overload issue. Two-shaft tire crusher is EPTly designed for aged tires with lower pace and higher torque to decrease sound and EPT use.
The blade of the shredEPTis manufactured of substantial quality metal and subjected to Bodycote heat treatment to obtain the very best crushing performance.The shredEPTis simple to disassemble and modify cutter blade and ideal for tearing big, added thick and difficult supplies.The thickness variety of the crushing blade is 25mm-152mm in accordance to the tire kind,output and ultimate solution. The grinEPTcan method OTR tires,large truck tires,vehicle tires and so on at the speed of 1-30tons whithin 1 hour.
| Design | Enter dimension | Output measurement | Cappacity | Motor | Blades quantity | Proportions | Weight |
| TS-800 | 800mm | fifty*50mm | one-2T/h | 2*22kw | 16pcs | 4*2.six*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | 3-5T/h | two*37kw | 20pcs | 4.eight*two.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | two*45kw | 16-30pcs | 5*2*3.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | two*55kw | 20-24pcs | 5.six*2*three.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | 10-15T/h | 2*75kw | 20-30pcs | six*two.4*4m | 36T |
| TS-2400 | 2400mm | one hundred-200mm | 20-30T/h | two*110kw | sixteen-24pcs | seven.4*3.two*five.2m | 56T |
2.Rasper
EPT tire shredding program is designed to make up to six tons for each hour of wire totally free rubber mulch.This method generates up to a 99% wire free chip ranging in size in between twelve-25mm dependent on the preferred measurement.Soon after processing,the steel is taken off by our magnetic separation system.At this stage,the wire free rubber chips are completely ready to be colored and utilised for landscaping mulch and the metal is prepared to be baled and marketed to smelters.
| Rasper | Motor | EPT | Capability | Proportions | Weight | Chopping chamber | Final item |
| R45 | Siemens | 45KW | 300-500kg/H | 1.four*1.two*two.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.seven*1.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | 700-1T/H | two*two*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | 2.one*two.one*four.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | 1.five-3T/H | 2*2.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.2*2.one*3.6m | 12400kg | 697*1562mm | 10-30mm |
3.Granulator EPT
Squander Tire Recycling Rubber Granule Creating EPT is adopting actual physical recycling strategy and is made to grind the rubber mulch from the rasper into modest granules as fine as one-6mm. The granules are screened and re-circulated till the preferred dimensions is achieved. This Totally-Computerized Tyre Recycling Line working in typical temperature, no need to have to include any other chemical substances, no pollution to the surroundings. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | one.eight*1.six*two.4m | 1.eight*1.nine*two.4m | two.2*2.3*3m |
| Last solution | 1-6mm | 1-6mm | 1-6mm |
four.Miller
Rubber powEPTis the final end result of ambient tire recycling.At this stage,crumb rubber is ground down into a thoroughly clean powEPTform with nearly all steel and fiber taken off.Rubber powEPThas numerous secondary employs from injection molding merchandise,coatings,roofing components and various asphaltapplications.
Rubber powEPTis normally found in forty-74 microns(.40-.74mm) in size.This micron dimension metarial has the gain of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for a variety of polymers and concluded merchandise.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter item | Heavy duty truck tyres to bicycle tyres | |||
| Enter dimension | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimension | shred to 30-one hundred twenty mesh rubber powder | |||
| Capacity | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Total Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
FAQ:
Q1,Are you a factory or a buying and selling company?
A. We are a company with thirty years production expertise in tire recycling EPT. We have export license, we can supply you the manufacturing facility rates.
Q2. Can you guarantee the potential as you described ?
A. Certainly indeed,except that,we also offer three-5years guarantee.
Q3, are you confident the ultimate rubber powEPTcan be totally clear out of wire metal or nylon ?
A. The ultimate powEPTpurity can get to ninety nine.9%. we have magnetic separator which can individual the wire metal from the rubber powder.
