rubber graunles making EPT vehicle tire recycling EPT
The EPT tire recycling EPT will be controlled by the PLC, all the resources will be process inside of EPTs, there is Actual ZERO Air pollution. one labor, one engineer can run all the EPTs, no need to have to function the EPTs, just management the PLC. the EPTs can safeguard the EPTs, perform the EPTs and hold the EPTs work easily.
Specification
one.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automatic management technique, with automatic reversal handle technique in overload condition. Two-shaft tire crusher is EPTly developed for aged tires with reduced pace and large torque to reduce sounds and EPT consumption.
The blade of the shredEPTis produced of high high quality steel and subjected to Bodycote warmth therapy to attain the very best crushing overall performance.The shredEPTis effortless to disassemble and change cutter blade and suited for tearing massive, further thick and hard components.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire type,output and ultimate product. The grinEPTcan approach OTR tires,massive truck tires,car tires and so on at the speed of one-30tons whithin one hour.
| Model | Input size | Output size | Cappacity | Motor | Blades amount | Proportions | Excess weight |
| TS-800 | 800mm | fifty*50mm | one-2T/h | 2*22kw | 16pcs | 4*2.six*three.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | 3-5T/h | 2*37kw | 20pcs | 4.eight*two.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | 2*45kw | sixteen-30pcs | 5*two*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | 7-10T/h | 2*55kw | twenty-24pcs | 5.six*two*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | two*75kw | twenty-30pcs | six*two.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | 2*110kw | sixteen-24pcs | 7.4*three.2*five.2m | 56T |
two.Rasper
EPT tire shredding technique is designed to make up to six tons for each hour of wire free of charge rubber mulch.This program makes up to a 99% wire free chip ranging in size amongst 12-25mm relying on the preferred size.Following processing,the steel is taken out by our magnetic separation system.At this stage,the wire cost-free rubber chips are completely ready to be colored and utilized for landscaping mulch and the steel is completely ready to be baled and bought to smelters.
| Rasper | Motor | EPT | Capability | Proportions | Bodyweight | Chopping chamber | Last solution |
| R45 | Siemens | 45KW | 300-500kg/H | 1.four*1.two*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.seven*one.7*two.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven-hundred-1T/H | 2*2*four.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | one-one.5T/H | two.one*2.1*four.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | 1.5-3T/H | 2*two.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | three-6T/H | six.2*2.one*3.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Making EPT is adopting actual physical recycling method and is designed to grind the rubber mulch from the rasper into modest granules as wonderful as 1-6mm. The granules are screened and re-circulated until finally the desired size is attained. This Totally-Computerized Tyre Recycling Line operating in regular temperature, no require to incorporate any other substances, no pollution to the setting. This is the greatest way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Ability | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Dimensions | one.eight*1.six*two.4m | 1.8*1.9*two.4m | 2.2*2.three*3m |
| Final product | one-6mm | 1-6mm | one-6mm |
four.Miller
Rubber powEPTis the closing end result of ambient tire recycling.At this phase,crumb rubber is floor down into a clean powEPTform with practically all metal and fiber taken out.Rubber powEPThas many secondary uses from injection molding merchandise,coatings,roofing components and different asphaltapplications.
Rubber powEPTis usually discovered in 40-74 microns(.40-.74mm) in dimensions.This micron dimension metarial has the benefit of getting integrated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and finished items.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter item | Large obligation truck tyres to bicycle tyres | |||
| Enter measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to 30-a hundred and twenty mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Total Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a manufacturing facility or a trading company?
A. We are a producer with 30 years manufacturing experience in tire recycling EPT. We have export license, we can supply you the factory charges.
Q2. Can you assure the capacity as you pointed out ?
A. Certainly sure,except that,we also supply 3-5years warranty.
Q3, are you certain the last rubber powEPTcan be entirely clean out of wire steel or nylon ?
A. The last powEPTpurity can achieve 99.9%. we have magnetic separator which can independent the wire metal from the rubber powder.
