Tire Shredding Plant/EPT Tire Crusher EPT To Make Rubber Powder
Squander tire recycling EPT is to crush squander tires into rubber powEPTin different measurements. The ultimate rubber powEPTis with purity of 99.ninety nine%, can be employed to make rubber tiles, rubber mat, asphalt, watertight content, filler of synthetic grass.
The functioning approach of waste tire recycling crumb rubber EPT is:
squander tire—tire circle cutter—tire strip cutter—tire slice cutter—rims separator—rubber crusher—magnetic separator—fiber separator—rubber powder
Specification of waste tire recycling EPTs:
1. Tire circle cutter is employed to lower and open up the joint of tire’s side and prime.
|
Name |
Motor EPT |
Fat |
Potential |
Tire specification |
|
Tire circle cutter |
4kw |
650kg |
40pcs/h |
650-1200mm (Each bolstered and nylon tires) |
2. Rims separator is utilised to independent the steel rims all around the tire to stay away from the damage to the EPT.
|
Identify |
Motor EPT |
Excess weight |
Capacity |
|
Rims separator |
7.5kw |
1300kg |
100pcs/h |
three. Tire strip cutter is used to reduce the tire cirlce into strips 5×8 cm .
|
Name |
Motor EPT |
Bodyweight |
Ability |
Slicing size |
|
Tire strip cutter |
4kw |
850kg |
two.5t/h |
5x8cm |
4. Tire slice cutter is employed to cut the strips into little chunks about three.5 cubic centimeter.
|
Name |
Motor EPT |
Fat |
Capacity |
Chopping dimensions |
|
Tire slice cutter |
4kw |
800kg |
.8t/h |
3x5x8cm |
5. Rubber crusher is to crush the rubber blocks into powEPTin distinct dimensions with purity of 99.ninety nine%.
| Design | Ability | Drum diameter | Drum duration | Front roll linear | Roll speed ratio | Max roller spacing | Motor EPT |
| XKP-350 | 3ton | 300mm | 500mm | 26.2m/min | one:two.5 | 8mm | 30kw |
| XKP-four hundred | 6ton | 400mm | 600mm | 34.5m/min | one:two.five | 8mm | 45kw |
| XKP-450 | 8ton | 450mm | 760mm | 38.0m/min | 1:two.five | 8mm | 55kw/75kw |
| XKP-560 | 10ton | 560mm | 800mm | 38.6m/min | one:two.five | 8mm | 75kw/90kw |
| XKP-560D | 20ton | 560mm | 1000mm | forty two.5m/min | one:two.5 | 8mm | 132kw/160kw |
Advantages of our rubber crusher EPT:
one. Crusher roller speed ratio: Ours is one: two.five, even though the aged variety roller velocity ratio is one: 1.38.
two. Roller composition: Our two rollers are the two grooved, which increase the friction and then improve the output, even though the previous type is a single with groove, and the other is clean.
3. Roller material: The roller is created by Welding wear resistant alloy materials, 5Cr6MnMo. We can supply you 3 years warranty of the roller. Whilst the aged varieties EPT use forged iron to make the rollers, very effortless to crack or crack in two .
four. EPT attribute: Our EPT is strength conserving one/3. For example, creating 1T powder, our EPT electrical energy consumption is only a hundred and fifty deg, whilst their electrical power usage is about 250- 280 deg in making 1T powder.
5. Bearing: Our EPT use rolling bearing, there are 8 items bearing inside of, while the old EPT use the slide bearings ( bush) , which is not as great as ours.
Mob:151366 0571 six
