Product Description

  Using sticky rice as major raw content, this wallpaper glue also called sticky rice glue or organic plant glue. It is eco-welcoming and will not likely cause any damage to your family health. The viscosity of our wallpaper glue is more powerful than other common wallpaper glues. It is appropriate for all kinds of wallpapers even some large wallpapers.

 Product Info:

Use:
1) Prepare the proper quantity of drinking water and containers according to operation parameter.
two) Take away the colloid and stir right up until the wire drawing condition, activating the colloid.
three) For the first time towards the h2o no much more than 15&percnt, proceed to stir to wire drawing state.
four) The remaining h2o is divided into 2-3 instances, each time must be certain to stir nicely.

Issues needing attention:
one. When you complete brushing the wallpaper primer, you can brush the wallpaper glue following becoming normally air-dried &lparthe interval time is 1-2 days typically).
2. You should use thoroughly clean damp towel to wipe the surface area of wallpaper if the glue overflow wallpaper. Please try to stay away from glue overflowing wallpaper.
three. According to the water absorption of wall and the climatope for the duration of the design, introducing 1 liters of h2o for every 2 kg of glue&lparThe ratio of wallpaper glue and h2o is 2:1). Stir till no lumps can be design, not also dilute.
four. You should not clutch the glue with hand in the process of stirring. As soon as you do it, the glue may lump in the method of stirring. So you need near 5 fingers together when you stir the glue.

About US:

   HangZhou Xihu (West Lake) Dis. Chemical Co., Ltd. is 1 of the biggest adhesive companies in China, specializes in the analysis, manufacture and marketing and advertising of diverse types of adhesives, integrated: Renewable sponge glue, spray adhesive, wallpaper glue, wall paint and so on. OEM adhesive is accessible listed here. 
 

###

###

###

###

###

###

###

###

The Importance of Wallpaper Primer

Regardless of the type of wallpaper you are planning to apply, it is important to use a good wallpaper primer. This will make sure the surface of the wall is even and uniform, which will help you to get the best finish coat possible.

Remove alkali from the wall before applying the wallpaper

Apparently it took two to tango but hey, it’s your wallpaper. The big dog will no doubt get a taste for the sex. For a start, you need a good pair of rubber gloves. It’s also a good idea to leave the door propped open. This will give you plenty of time to finish up your latest wallpaper find. A bonus is the fact that your mate will have a nice chuckle while you are still snooping around. If you’re lucky, you’ll end up with a newbie in the process. Besides, it’s a good time to relive the sexstress. This is especially true if you’ve dated your wife. One could easily spend an entire evening with her but it’s important to make a fresh start for the best possible start.

Prevent mildew from reoccurring on walls

Using wallpaper primer can help prevent mildew from reoccurring on walls. Mold is a fungus that grows in a damp environment. If it is allowed to grow, it can cause structural damage to your home. It can also affect your health. There are many ways to prevent mold, but the best solution is to control moisture.
If you live in a house that is frequently subject to flooding or other forms of water infiltration, you may have a moisture problem. In such cases, you will need to locate the source of the excess humidity and fix the problem. For instance, reshingling a leaky roof or sealing up air-conditioning ducts are some solutions. Alternatively, you can purchase a moisture meter. These are easy to use and can be found in DIY stores.
You can also use a stain-killing primer to paint over problematic stains. These primers are formulated with anti-microbial agents that prevent stains from bleeding through your wallpaper. The best way to prevent mildew from reoccurring is to treat the problem right away.
Once you have determined the source of the problem, you can treat the mould. The best approach is to first treat the surface with an anti-mould primer. After the mould is removed, you can then apply a moisture-stopping barrier primer.

Pigmented or white primers

Choosing the right pigmented or white wallpaper primer for your project can be a crucial step in the wallcovering installation process. It is important to consider factors such as the condition of the walls, the types of wallpaper being used, and your project goals.
A white or pigmented deep primer is designed to even out colour differences. It is a liquid-to-viscous undercoating that is applied to the surface of gypsum plasterboard. This primer is mainly used on exterior walls, but can also be applied to interior walls.
If you are applying new wallpaper or retouching work, you may want to use a white pigmented deep primer. This product has the same properties as a colourless deep primer, and it will hide any seams or joints. It will make the entire wall uniformly white, and prevent the old wall color from showing through.
You can apply a deep primer in undiluted form, or diluted with water. For the most part, you can apply the deep primer with a paint roller or brush. You should begin at the top of the wall and work your way down. It is also important to move your roller in a vertical manner.
Using a white or pigmented deep primer will make your wallpaper installation go much faster. It will also help to prevent your sheetrock from coming down with your wallpaper. The wall covering primer will ensure that your wallpaper paste will not soften the latex paint on your walls.

Ensure the wall is clean, dry and sound before applying the primer

Ensure the wall is clean, dry and sound before applying the wallpaper primer. This will help you get the most out of your wallcovering project.
There are a few ways to do this. The easiest way is to wash the wall with hot water and vinegar. You can also use a sponge.
The best method is to use a multi-purpose cleaner. This will ensure that all the dirt, grease, and scuffs are gone.
If your walls are textured, you may want to use a wallpaper liner. This will smooth out the texture and create a smooth surface on which to hang your wallpaper. The paper will then have a better chance of adhering to your wall.
The best part of this is that you’ll know for sure when your wallcovering is ready to be installed. It can take about 30 days for the paper to dry.
The best way to see if your wall is prepped for the wallpaper is to test it out. You can do this by using a damp cloth 24 hours before hanging your wallpaper. If it does not stick to your wall, you have some work to do.
If you’ve got a greasy, rough or dusty wall, you might want to consider priming it with an acrylic or alkyd primer. This will give your wall a smooth, glossy surface. You’ll also want to make sure that the primer you choose is the correct one for your particular wall.

editor by czh 2022-12-17